After rearranging everything and cutting the new door, I started putting things back up. The first step was to get the peg-board back on the wall. Peg board is great for arranging all your tools in a nice easy to find area, that doesn’t take up much space. There already was a peg board in the basement, but I took it down when the guy came to reinforce the walls. To put it back up I used some concrete screws and just bolted some 2×4’s to the wall. While expensive these screws worked very well and made for a nice solid backing.

As an aside, a little while ago my 1.5 year old camera decided to call it quits. The Sony DSC-T9 which I was previously quite happy decided it didn’t want to focus anymore (hence the poor focus on this pic). Of course the camera only has a 1-year warranty. This meant that I now had a nice $400 brick instead of a nice little camera. I was able to get it kind of working again by swapping some parts out with one I got on ebay, but still I won’t be buying another Sony any time soon.

Every good shop needs an air compressor. They are wonderfully useful for all sorts of things, particularly nail guns. My grandfather recently passed away and he had a very well equipped shop. Fortuanly I got to inherit alot of his old tools including his table saw, drill press, and this air compressor. This a big ~25 gallon 2-stage compressor. It’s also quite old, 1934 to be exact. That means two things, first is it doesn’t have a very powerful motor, only 3/4hp (but I could put a bigger one on if I need to) and its heavy, very very heavy. Getting it out of my grandfathers basement and into the truck took four guys and we were all exhausted by the end of it. This was particularly interesting considering my Uncle’s comment that my grandfather had gotten it into the basement all by himself, using a block and tackle.

Well when I got the truck home I was all by myself. Sure I could have called up some friends and had them come over and give me a hand, but where’s the fun in that? So I set to work getting it out by myself. First I slid it onto the table saw stand (which was on wheels) and then rolled the stand to the back of the garage. Now the problem was how to get it off the stand, and onto the ground (at which point I would slide it into the basement). I looked at the old block and tackle and thought I might just be able to lift it using that. So I hooked up to a rafter, used some chain to hook it to the compressor, and pulled on the rope. No dice. I was just barely able to lift it a little bit, and then I had no way to move the stand.

I needed something stronger. Fortuantly an idea popped into my head. My car had a tow loop on it, and it could easily pull the 350lbs or so the compressor weighed. So I ran the rope over to the car, tied it off, and backed up a bit. Low and behold it lifted up easily. I put the e-brake on, hopped out, moved the stand out of the way, got back in and lowered the compressor down. It was a cake walk. Sliding the compressor downstairs was a bit more work, but once again taking advantage of the block and tackle it was manageable.

The floor plan of the basement was fairly simple when we moved in. two big rooms divided by a simple wall with a slight jink in it. I only had one problem with it, everytime I wanted to walk to the workbench I would need to go all the way around and back again. Sure its only probaly an extra 20ft to walk, and I could probaly use the exercise, but I didn’t like it. Considering that I frequently forget a tool that I need while I’m working upstairs or outside I spend lots of time running downstairs to get one or two things. Since most of these tools would be hung on the pegboard above the bench, it was an added irritation that I didn’t need. So I decided to rearrange things a bit.

I moved the door from the jink in the wall to right at the base of the stairs. This seems like a much more logical route and it will undoubtedly save me alot of time. Plus cutting the new whole for the door was alot of fun, I got to just take my new reciprocating saw and just cut the outline of a door. I then took what was left and used it to cover up the old doorway. Piece of cake. One problem, the light switch was all the way down by the old door, so I had to move that as well, which was of course far more difficult. I also rearranged the shelves and benches a bit to give myself more room, as well as be able to have a big open area for big projects. The table saw is on wheels so I can move it out of the way or into the center of the room as needed.

This is what the basement looked like when we moved into our new house. It has an old freezer, some old shelves, a few workbenches, and a whole lot of junk. The previous owners didn’t do a very good job of cleaning out all of the stuff they should have, however it wasn’t worth complaining about it at the closing. The downside is that its a decent bit of work to get rid of all their junk, but on the upside there were a few useful items, like some crowbars, torch, and pipe cutters. My current project is going to be getting this space cleaned up and organized so that I can use it as my workshop. I’ll probably move the door, run some more wires, hang some lights, and put up some more shelves. We’ll see how it goes.