Insulation!

With winter fast approaching we decided it would be a good idea to add some more insulation to the house. Currently in the attic there was only a few inches of blown fiberglass. Not only would this hopefully save us some money in the long run, but it would also keep the house a more consistent temperature. Before the added insulation the upstairs would be significantly colder than the ground floor (where the thermostat is located). There are a coup;el different choices of insulation, the primary ones being foam, fiberglass or cellulose. Cellulose (which is basically ground up newspaper treated to prevent rot and bugs and such) is the cheapest and also one of the easiest to install, so we went with that. It comes in bales that you pull apart and put in the ‘blowing’ machine, which then blows it through a long hose up into the attic. Sounds simple, easy and quick. Well of course it sounds easier than it is, but only by a little bit. The biggest problem seemed to be that the blower (which the lend to you for free if you buy enough insulation) was a bit underpowered and seemed to bog down.

Fortunately that just meant it went a bit slower than I was guessing. Its really a two man job so I enlisted the help of my friend Greg, and we spent the day doing both of our houses. He put in about 35 bales and I put in about 45. I think I ended up with a R-48 or so in the attic. The hardest part is moving around in the attic, other than that you basically just point the hose where you want it to go and wait for the insulation to fly out. The other guy has a bit of a harder job, taking the bales breaking them up and tossing them in the hopper. Unlike fiberglass insulation, the cellulose doesn’t irritate your skin, although the borate that is added does smell a bit funny. I’m quite happy with how it turned out, it seems to have made the upstairs significantly warmer, and Greg has mentioned that his house seems quieter too.

Bathroom’s Finished!

Entrance

Well after a few months the bathroom is finally all finished. Took a bit longer than I excpected it, which I suppose is not suprising. It was really the tiling that slowed me down, cutting and setting the tiles was a real pain. Ohh and the 7 coats of paint in three colors certinly didn’t make things go any faster.

All in all though we are very happy with the results. I’m also quite glad that I did it all myself. it was a great learning experience, and I think everything turned out wonderfully. I also can’t imagine how people did things in the olden days (read: pre-1998). Without the folks over at the John Bridge Ceramic Tile Forum I doubt I would have gotten through it. Thats not to say that I didn’t look in books and ask friends and family for help too, but the books can’t anwser your questions when things are a bit peculiar, and sometimes your friends and family don’t have all the answers (all though they were also quite helpful!) .

Lastly I’ve found one of the biggest problems is trying to take a good picture of the bathroom. My camera is a tiny little point and shoot which is great for taking with you, but it has a rather narrow field of view, and with such a small room its hard to get a good shot. What I’ve done for this picture is to take a slew of smaller ones, and stitch them together to try and show the whole room (which of course makes for some oddities in the photo.

Green Bathroom!

green.JPG

Well the color saga is finally over (I hope).  After picking our first color, that was supposed to be blue-gray, and turned out purple, and our second color that just didn’t really match our tile, we’ve finally settled on this nice green color.  We also switched paints for this color.  Typically I’ve just used the Lowes brand called Valspar.   Most of the time I’ll just use the regular stuff, but for small applications I generally get the the Valspar Premium, which in semi-gloss runs about 30 bucks a gallon.  This time however we got some Benjamin Moore Regal semi-gloss instead.  It was quite pricey, at $45 a gallon, however it is noticably better than the Valspar Premium.  The Valspar is quite thick which helps it cover well, however it also seems to make it more prone to drips.  It seems that while you’re painting it will look fine, but after I’ve finished I’ve gone back and found drips where I had none before.  The Benjamin Moore paint covers just as well, but its not nearly as thick, and thus doesn’t seem to have as many drips.  I’m not sure its worth the significantly higher cost, but it does seem to be good stuff.

Broken Glass

Well this is what happens when you attempt to put a screw just a tiny bit to close to tempered glass.  I was in the midst of putting the shower door up, and was screwing this panel in.  I drilled a hole for a screw in the upper left hand corner, but it seems it was just a tiny bit to close to the glass, and when i put the screw in it shattered it.  If it had just been regular glass it would have probably just put a little chip in it, but it was tempered glass, so the entire panel instantly shattered, with no piece being bigger than 1/4″.   Hopefully it won’t be to hard (or expensive) to get a replacement.

Blue bathroom!

After realizing that the Purple wasn’t gonna cut it, we quickly ran over to Lowes and grabbed some nice blue paint (that’s actually blue!) and threw a few coats of that up.   Initially I was quite happy with it, sadly Jess was not.  She thinks that while its a lovely color it doesn’t match anything.  After looking at it a few times, I’m beginning to agree with her.  We’ll have to see what I think in a week or two, but we may end up painting it a third time.

Purple Bathroom?

Picking out a paint color is always hard.  You only get the tiny little paint chip to go by, and it always ends up looking different when its on the wall.  We picked out what I thought was this nice blue-gray color.   As soon as we put it up I quickly realized that it wasn’t blue, it was purple.  This made me none to happy as I really don’t want my fancy new bathroom to be purple.  Guess its time to head back to Lowes and see if we can pick a better color.

Dusty

I hadn’t wanted to do any more spackling without the grout being done, for fear that the spackle would get into the grout lines.  Now that its all finished though, I finally got back to spackling.  The biggest challenge was the transition from the cement-board to the sheetrock.  The Durock was about 3/16 higher than the sheetrock so I had to feather that out with a significant amount of joint-compound.   I also had to tape up the corners, which although it went a bit better than the first time I did it on the wall in the bedroom, it still was tricky, and didn’t end up looking that good.

Granite Countertop

The guy came from Westwood Tile and Stone  today to install the granite countertop for the vanity.   The vanity looks great now, and the guy did an excellent job installing it.  However he was pretty much the only part of our dealings with Westwood that I was particularly pleased with.  Although there weren’t any huge problems, there were a bunch of minor issues that would prevent me from using them again.   In addition to the granite, we also bought the tile from Westwood.  On our first trip to the store, we worked with a very nice gentleman who was very helpful and informative.  However when we went back the second time to look at the granite, he wasn’t there so we worked with another saleswoman, who was much less helpful.   We spent alot of time being concerned that they weren’t gonna get the granite to be the right size.  It wasn’t until the next time that she mentioned that they would come out and make a template.

When we went the third time to make the final decisions on the tile, and to pay for everything, we once again got a different saleswoman.  We picked out the tile we wanted, and also the trim tile.  She never mentioned that the trim tile was a eight of an inch thicker than the field tile.  (Fortunately I was able to put a thinner coat of thin-set on and it looks alright)  When the tile came in we never got a call about it, I had to call and find out that it was waiting for us.  Lastly with the granite, the holes for the faucet were not countersunk, so the fittings for the faucet didn’t fit through. 

 It all ended up working out ok,  and perhaps most of the stuff is things I should have already known.  However the tile and granite cost a small fortune, and I felt that for that price we should have gotten a little better service. 

Finished up grouting

groutfloor.JPG

Been extra busy this week, trying to get ready for the granite counter-top to arrive on Friday.  We  finished up most of the grouting today.  On the floor we choose to use a ‘latte’ colored Spectralock grout.   We were quite scared when the grout first went it, as it looked very light, and rather pink.  However it darkened as it dried, and although I think it might be a bit better if it was a shader darker still, I’m still quite happy with how it looks.   For the floor we mixed up two mini-units of grout, and then put half in the freezer while doing the first half.   After I finished the first half, which was getting difficult to work with, I pulled the second out and it was still nice and soft.  After finishing up, I took the remaining lump and put that back into the freezer, in case I found any spots we missed.